Type | Image | Référence | Description | Cotation |
---|
KEYBOARD | | C4739-60105 | ‘Windows’ keyboard assembly (Quartz Gray, 105 key) – Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) – Replacement for the C1405B, C1405C, and D4950B Keyboards |
|
KEYBOARD | | 435302-001 | PS/2 ‘Windows’ keyboard assembly (Silver and Carbonite Black) – Has attached 1.8M (6.0ft) cable with 6-pin (Violet) mini-DIN connector (USA) |
|
CABLE | | 5063-8400 | Ribbon cable with two self adhesive cable clamps and installation instructions – 8-pin (F) connector marked ‘NetServer’ to 8-pin (F) connector marked ‘Remote Assistant’ – 1.0m (39in) cable folded to be 63.5cm (25in) long – From Remote Assistant board to c |
|
CABLE | | 5182-4535 | Ribbon cable assembly – 3-pin (F) connector to 3-pin (F) connector – 30cm (11.8in) long – I2C bus cable assembly – From hot-swap backplane boards to system (mother) board (two used) |
|
CABLE | | 5182-6746 | Fast Wide SCSI ribbon cable – Cable is marked ‘Internal SCSI cable C22-90 ohm’ – Has one 68-pin (M) connector marked ‘To motherboard or PCI board’ and one 68-pin (M) connector marked ‘To SCSI mass storage device’ – 76.7cm (30.2in) long – Cable C22 – From |
|
CABLE | | 5182-6747 | SCSI ribbon cable (C14) – Fast Wide (Ultra) cable marked ‘Int. SCSI bridge cable C14-90 ohm’ – 68-pin (M) connector marked ‘Top’ to 68-pin (M) connector marked ‘Bottom’ – 23.6cm (9.3in) long – Between the two hot-swap backplane boards (configuration depen |
|
CABLE | | 5182-6749 | Fast Wide SCSI ribbon cable (C23) – Cable marked ‘External SCSI port cable C23-90 ohm’ – 68-pin (M) connector marked ‘To system board’ to high density 68-pin (F) connector with latch clips for the rear panel – 51.8cm (20.4in) long – From one of the proces |
|
CABLE | | 5182-6788 | Ribbon cable for one IDE drive – 40-pin (F) connector to 40-pin (F) connector – 51cm (20in) long |
|
CABLE | | 5182-6789 | Floppy drive ribbon cable – 34-pin (F) connector marked ‘to system board’ to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector marked ‘to 3.5 inch flexible disk drive’ – 61.9cm (24.4in) long |
|
CABLE | | 5182-9413 | Fast Narrow SCSI-2 90 ohm ribbon cable with termination (C21) – Has a 50-pin (F) connector marked ‘To array back plane’ and two 50-pin (F) connector marked ‘To unterminated SCSI device’ – 47cm (18.5in) long – From CD-ROM drive to hot-swap backplane board |
|
CABLE | | D4845A | SCSI cable kit – Used to reconfigure the mass storage interfaces – Kit includes: hot swap backplane cable (C14), Fast/Wide port cable (C22), and 50-pin to 68-pin adapter (A) |
|
BEZEL | | 5063-8380 | Bezel assembly – Has cut outs for switches and LED activity lights – Plastic cover over the control panel PC board |
|
BEZEL | | 5063-8390 | ‘Hot swap’ bezel assembly (Flint Gray) – Frame around six ‘hot swap’ drives – Includes the lock |
|
BEZEL | | 5064-0715 | Hard drive tray bezel (Flint Gray) – For 3.5-inch hard drives |
|
FAN | | 5064-0701 | Fan assembly – With housing – Mounts to the rear panel in the upper slot (above the power supply assembly) |
|
FAN | | 5064-0725 | Tubeaxial fan – Mounts to the front panel (Two used) |
|
SWITCH | | J1460A | 8-port Console Switch (Parchment White) – Connect up to eight computers to a single monitor, keyboard, and mouse – Desktop or rack mountable |
|
SWITCH | | J1473A | 4-port Console Switch – Connect up to four computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately |
|
SWITCH | | J1474A | 8-port Console Switch – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes rack mounting hardware – Must order connecting cables separately |
|
SWITCH | | J1493A | 4-port Console Switch (Quartz Gray) – Connect up to four computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable |
|
SWITCH | | J1497A | 8-port Console Switch (Quartz Gray) – Connect up to eight computers to a single monitor, keyboard, and mouse – Includes hardware, user manual, and power cable |
|
ADAPTER | | 5182-4550 | SCSI adapter (68-pin (F) to 50-pin (M)) – Used in some configurations for the CD-ROM drive and/or another Single-Ended SCSI drive (Narrow 8-bit to Fast Wide 16-bit) |
|
COVER | | 5063-8378 | Chassis cover – Includes front, top and both sides |
|
COVER | | 5064-1913 | Locking cover (Flint Gray) – Attaches to the front of the ‘Hot Swap’ drive trays |
|
PANEL | | 5063-8389 | 5.25-inch filler panel (Quartz Gray) – For empty 5.25-inch drive bays above the Hot-Swap drive bay |
|
PANEL | | 5063-8391 | Hot Swap drive filler panel (Flint Gray) – For empty Hot-Swap drive slots |
|
MOUSE | | C3751-60201 | PS/2 two-button serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-DIN connector – (Part of C3751B) |
|
MOUSE | | C3751B | 2 button PS/2 serial mouse (Quartz Gray) – Has attached 6ft cable with 6-pin mini-din connector |
|
DRIVE | | 5064-7985 | SCSI-2 CD-ROM drive (Flint Gray) – 32X CD-ROM read – Has loading tray – Replacement for the 4X CD-ROM (Model D2992B) and 12X CD-ROM drives |
|
DRIVE | | D2035-60282 | 1.44MB, 3.5-inch floppy drive (Flint Gray) – 1/3 height – (Part of D2035A/B) |
|
DRIVE | | D2077-69001 | 2.0GB SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor |
|
DRIVE | | D2077A | 2.0GB Fast SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor |
|
DRIVE | | D3341-69001 | 4.0GB SCSI-2 hard drive – 5,400 RPM, 3.5-inch form factor |
|
DRIVE | | D3341A | 4.0GB Fast SCSI-2 hard drive – 3.5-inch form factor |
|
DRIVE | | D3581-69001 | 1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D3581A | 1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D3582-69001 | 2.1GB hot-swap SCSI-2 hard drive module (Dove Gray) |
|
DRIVE | | D3582-69002 | 2.1GB hot-swap hard drive module (Flint Gray) |
|
DRIVE | | D3582-69004 | 2.1GB hot-swap Ultra SCSI hard drive module (Quartz Gray) |
|
DRIVE | | D3582B | 2.1GB ‘hot swap’ Fast SCSI-2 hard drive module – Flint Gray |
|
DRIVE | | D3582C | 2.1GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray |
|
DRIVE | | D3583-69000 | 4.2GB hot-swap Ultra SCSI hard drive module – 7,200 RPM |
|
DRIVE | | D3583-69001 | 4.2GB hot-swap SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D3583-69004 | 4.2GB hot-swap SCSI-2 hard drive module (Flint Gray) |
|
DRIVE | | D3583A | 4.2GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
|
DRIVE | | D3583B | 4.2GB ‘hot swap’ fast SCSI-2 hard drive module – Flint Gray |
|
DRIVE | | D3583C | 4.2GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray |
|
DRIVE | | D4289-69001 | 9.1GB hot-swap Ultra SCSI-2 hard drive module (Quartz Gray) |
|
DRIVE | | D4289A | 9.1GB ‘hot swap’ Ultra SCSI hard drive module – Quartz Gray |
|
DRIVE | | D4903-69001 | 4.2GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM |
|
DRIVE | | D4956-69001 | 4.2GB SCSI-2 hard drive – 7,200 RPM, 3.5-inch form factor |
|
DRIVE | | D5039-69001 | 18.2GB hot-swap Ultra Wide SCSI hard drive module – 7,200 RPM |
|
DRIVE | | D5039A | 18.2GB hot-swap Ultra Wide SCSI hard drive module – 7,200 RPM |
|
DRIVE | | D6019-69002 | 9.1GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM, SCA 80-pin connector |
|
DRIVE | | D6019A | 9.1GB hot-swap Ultra SCSI hard drive module – 10,000 RPM |
|
DRIVE | | D2035B | 1.44MB, 3.5-inch floppy drive (Flint Gray bezel) |
|
DRIVE | | D3582A | 2.1GB hot-swap Fast SCSI-2 hard drive module (Dove Gray) |
|
DRIVE | | D4903A | 4.2GB hot-swap Ultra Wide SCSI hard drive module – 10,000 RPM |
|
MEMORY | | D4295-69001 | 32MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4295A) – for HP LH Plus 5/166 |
|
MEMORY | | D4296-69001 | 64MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4296A)- for HP LH Plus 5/166 NetServer |
|
MEMORY | | D4297-69001 | 128MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module – (D4297A) – for HP LH Plus 5/166 NetServer |
|
PC BOARD | | D2967-69004 | HP LH Plus 5/166 NetServer Remote Assistant Assy (for Outside of Canada/US) (D2967C) – without on-board Modem – When Upgrading from a D2967A/B to D2967C also Order Firmware/Software Upgrade Kit |
|
PC BOARD | | D2968-69005 | HP LH Plus 5/166 NetServer Remote Assistant PC Board Assembly (Canada/US) (D2968C) – with on-board Modem – When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit |
|
PC BOARD | | D3604-63003 | HP LH Plus 5/166 ‘Hot Swap’ Backplane Board – for the ‘Hot Swap’ Drives – Mounts in the Rear of the ‘Hot Swap’ Drive Cage (2 Used) |
|
PC BOARD | | D4248-69001 | HP LH Plus 5/166 NetServer System (Mother) Board – with Super VGA, IDE and Two Fast/Wide SCSI-2 Controller Ports – Large Vertical Board in Center of Chassis |
|
PC BOARD | | D4840-68002 | HP LH Plus 5/166 NetServer Power Management Board – Interfaces the Power Supply (or the Two Power Supplies) to the Rest of the Computer – Includes Power Supply Input and Power Output Connectors |
|
PC BOARD | | D4256-69001 | HP LH Plus 5/166 NetServer Processor Board (Small Horizontal Board) – Has Two Processor IC Sockets and Four DIMM Sockets |
|
INTERFACE | | C3610-69050 | Dual Channel Fast Wide SCSI Disk Array Controller Board – (P/O C3610A) – Plugs into a PCI Board Slot on the System (Mother) Board |
|
INTERFACE | | D2078B | EISA 32-Bit fast SCSI-2 host bus adaptor |
|
INTERFACE | | D2967C | Remote Assistant Board (for Outside of Canada/USA) – Intelligent EISA Based Remote Management Board with Onboard NiCad Battery and Processor – Does NOT Include a Modem |
|
INTERFACE | | D2968C | Remote assistant board – Intelligent EISA based remote management board with onboard nickel cadmium (NiCd) battery, processor, and modem (Canada and USA) |
|
INTERFACE | | D4943-69001 | NetRAID 3-Channel Disk Array Controller – PCI Board With 3 Internal 68 Pin and 2 External 68 Pin High Density Ultra Wide SCSI Connectors (D4943A) |
|
INTERFACE | | J2577-69001 | EISA 32-Bit LAN Interface Board – has Two RJ-45 Connectors – One 10M bits/s (10Base-T) and One 100M bits/s (100VG/802.12) (P/O J2577A, 1/6 of J3007A, 1/24 of J3008A) |
|
INTERFACE | | J2585-69011 | 32-bit PCI LAN interface board – RJ-45 connectors – Supports both EtherTwist 10Base-T and 100VG/802.12 – (J2585B, part of J3009B, part of of J3010B) |
|
INTERFACE | | J2585B | PCI 32-Bit LAN Interface Board – has RJ-45 Connector – Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B) |
|
INTERFACE | | J3171A | PCI LAN Interface Board – Has RJ-45 Connector for 10Base-T or 100Base-TX Ethernet (P/O J3171A, 1/6 of J3172A, 1/24 of J3173A) |
|
POWER SUPPLY | | 5064-0795 | Autoranging power supply – 100-240VAC input, 350 watts – For worldwide use |
|
PROCESSOR | | 1821-2604 | Intel Pentium processor – 166MHz (P54C) – Does NOT include heatsink |
|